TSPSC Assistant Engineers Syllabus AE For in various engineering subordinate services, municipal Assistant engineer and technical officers in public health and Municipal engineering subordinate service

By: Rejin Paul
Jun 09,2018
{{ postlikes }}
{{ratedCustomerCount}} Post Rating

TSPSC Assistant Executive Engineers AE Exam Scheme and Syllabus Download

TSPSC post of Assistant Engineers AEE Syllabus 2018 - Telangana State Public Service Commission conducts examination for Assistant Engineers Post across the state. Candidates can download exam pattern and syllabus for Assistant Engineers (AE) Job from Rejinpaul Network. TS Public Service Commission conducts Preliminary/ main Exam for Trained Graduate Teacher Post. Applicant appearing Assistant Engineers examination can download Telangana Trained Assistant Engineers AEE Exam syllabus PDF format in telugu language. AEE Telangana syllabus can be downloaded by scroll down this page this webpage.TS Public Service Commission has published exam syllabus online. Candidates can check and download syllabus of Assistant Engineers (AE) and check scheme of examination Here

TSPSC Assistant Engineers AE Job TS Recruitment Various Posts

Telangana Assistant Engineers Post

Scheme and syllabus for recruitment to the posts of Assistant Engineers in various engineering subordinate services, municipal Assistant engineer and technical officers in public health and Municipal engineering subordinate service

TSPSC Assistant Engineers Post scheme and syllabus of examination

Scheme of Examination

Scheme and Syllabus for the post of Assistant Engineers in various engineering subordinate services
Part: A: WRITTEN EXAMINATION (Objective Type) No. of Questions Duration(Minutes) Maximum Marks
Paper-I: General Studies and General Abilities 150 150 150
Paper-II: Civil Engineering (Diploma Level) OR Mechanical Engineering (Diploma Level) 150 150 150



Section-I: General Studies and General Abilities

1. Current affairs – Regional, National and International.
2. International Affairs.
3. General Science; India’s Achievements in Science and Technology.
4. Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
5. Economic and Social Development of India and Telangana.
6. Physical, Social and Economic Geography of India.
7. Physical, Social and Economic Geography and Demography of Telangana.
8. Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.
9. Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
10. Indian Constitution; Indian Political System; Governance and Public Policy.
11. Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.
12. Society, Culture, Heritage, Literature of Telangana.
13. Policies of Telangana State.
14. Logical Reasoning; Analytical Ability and Data Interpretation.
13. Basic English (8th Class Standard)


1. Surveying

Fundamental concepts; Classification of Surveys; Chain Surveying; Compass Surveying; Levelling and Contouring; Theodolite Surveying; Tacheometry; Curves; Introduction and fundamental concepts of electronic measuring instruments - EDM, Total Station, GIS & GPS.

2. Construction Materials & Practice

Properties and uses of construction materials - Stones, Bricks, Tiles, Sand, Cement, Timber, Plastics, Glass, Asbestos, Paints, Distempers, Enamels and Varnishes; Preparation of Cement mortar for various works. Classification of Buildings as per NBC, Site investigation for foundation as per NBC -Trial Pit and auger boring, classification of foundations, construction of spread footing and well foundation; Stone and Brick masonry - types and principles of construction; Doors and Windows - types, fittings and fastenings, types and functions of Lintels, Sunshades and  Roofs, Flooring - Construction and types of material; Types of Stairs; Scaffolding; Types of Plastering, Pointing, Painting and White / Colour Wash.

3. Engineering Mechanics and Strength of Materials

Forces - types of Forces, Parallelogram, Triangle and Polygon Law of Forces, Lami’s theorem; Centre of Gravity and Moment of Inertia; Simple stresses and strains, Hooke’s law – stress strain diagram, working strength, elastic constants, Poisson’s ratio, Relationship between elastic constants, compound rods, temperature stresses, strain energy, proof resilience, impact loading; Shear force and bending moment diagrams for simply supported, over hanging and cantilever beams, relation between intensity of loading, shear force and
bending moment; Theory of simple bending, modulus of section, moment of resistance, distribution of shear stress in rectangular, circular and I-Sections; Deflection in cantilever and simply supported beams subjected to simple loading; Columns and struts - Euler’s and Rankine’s formulae, Slenderness ratio, simple built-up columns; Analysis of dams and retaining walls; Simple plane and pin-jointed trusses, Stresses by method of joints and method of sections.

4. Hydraulics

Properties of fluids, fluid pressure and its measurement; Types of flows, energies in fluid motion, Bernoulli’s theorem and its applications – venture metre, pitot tube; Orifice and mouthpiece; Notches and weirs; Flow through pipes, hydraulic gradient line and total energy line, laminar and turbulent flow in pipes - Reynolds number, measurement of velocity; open channels; Water turbines – classification, centrifugal and reciprocating pumps; Layout of hydroelectric power plant.

5. Quantity Surveying

Abstract estimate, detailed estimate - centreline and long & short wall method, various items of Civil Engineering works as per Indian Standards; General Specifications - earth work, brick / stone masonry in cement mortar, RCC, plastering in cement mortar, Floor finishes with ceramic tiles and marbles, white washing, colour washing; Standard schedule of rates, lead and lift, preparation of lead statement; Computation of earth work - Midordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule; Approximate estimate – Plinth area and cubic rate estimate.

6. Design of Structures (RCC and Steel)

RCC structures: Design philosophies – principles and concepts of working stress method and limit state method, loads and permissible stresses, IS specifications, analysis and design - rectangular beam, slab, T-beam, column, footing and stair case. Steel Structures: Properties of steel sections, loads and permissible stresses, IS specifications, Analysis and design - welded joints, beam, column, column base, tension
member; Design of roof truss.

7. Irrigation Engineering

Definitions, duty, delta, base period, rainfall and its measurement, factors affecting runoff, methods of computing maximum flood discharge; Classification of head works, component parts of a weir and barrage, factors influencing selection of site - reservoirs and dams; Classification of canals, canal lining, cross drainage works; Soil erosion, water logging, soil water plant relationship; Necessity of irrigation - advantages and disadvantages, irrigation methods.

8. Environmental Engineering

Basics of ecosystem, water supply scheme; Sources of water; Conveyance of water – pipes, joints and laying; Testing of water, drinking water standards; Treatment of water; Distribution of water; Water supply connection to a building. Quantity of sewage, surface drains, design of sewers running half full, limiting velocities; Laying of sewers, sewer appurtenances; Collection of sewage samples, characteristics of domestic and industrial sewage – BOD, COD; Sewage treatment, septic tank & soak pit, sewage disposal - dilution and sewage farming; House drainage arrangements in buildings; Solid waste - collection and disposal; Air Pollution - sources, effects and controlling methods.

9. Transportation Engineering

Alignment of roads - plain and hilly terrain, surveys; Cross section of road structure, width of pavement, Camber, Gradient, Super elevation, Transition curves, horizontal and vertical alignment; Pavement marking, traffic signs, traffic islands Types of soil, classification of soil - Textural, IS Classification, physical properties -
plasticity, cohesion, consolidation, compaction, permeability, compressibility, soil moisture content, specific gravity, density; Bearing capacity of soil.

Hope candidates downloaded syllabus for post of Assistant Engineers from TSPSC. Rejinpaul Network Updates TSPSC Online Application, Syllabus, Admit Card and Results candidates seeking Telangana Public Service Commission Updates visit us


Rejin Paul

Hello, Welcome to our Rejinpaul Network. we are Committed to provide educational services for students through our Important Threads in this Website. N.R.Rejinpaul,Founder / Rejinpaul Network working for the welfare of the students since 2010


There is no Comment yet.


{{ comment.username }}

{{ comment.date }}
{{ comment.comment }}
leave a comment

{{ commentMsg }}

Please Login & post your comments...

Create Account

This is required.
This is required.
This is required.
This is required.
This is required.
This is required.
This is required.
Male Female
This is required.
School College
This is required.
This is required.

Log In Your Account

This is required.
This is required.

Forgot Your Password?

Post Your Rating

your rating : {{ ratings.rating }}